Thermal balance
Track heat across the fleet and preserve stable operating envelopes.
Fleet intelligence / Online
Command your fleet.Not each machine.
One control layer for every ASIC. Connect in minutes, optimize continuously, and keep authority over every device.
Firmware agnosticPool agnosticAlways reversible
Explore system
One-command onboarding
From powered on to fully connected.
No control-plane rebuild. No repetitive device setup. Run one command and HashOps establishes a secure link to your existing fleet.
01 — IDENTIFYHardware and firmware are detected automatically.
02 — CONNECTA managed route is established to your chosen pool.
03 — OBSERVELive operating data begins streaming immediately.
$
→ device detected ASIC-HX840
→ secure route established
→ telemetry stream online
Continuous intelligence
Every signal.
One operating view.
HashOps reads the conditions around every share, then makes measured adjustments to keep your fleet stable and efficient.
North Hall / Unit 042HX-94A7 · STRATUM CONNECTED
OptimalHashrate141.7TH/s
Temperature67.2°C
Efficiency18.6J/TH
Lower latency
Route every connection through a managed, low-latency Stratum layer.
Cleaner shares
Reduce stale and rejected work without risky clock changes.
Managed Stratum proxy
The shortest path to your pool.
HashOps sits between your hardware and pool of choice, continuously managing the route while leaving the destination entirely up to you.
Pool agnosticKeep the pools and payout setup you already trust.
Measured routingLatency is observed continuously, not guessed once.
Authority stays with you
Control without compromise.
Every change is explicit, visible, and reversible from any browser.
Active
Unlock
Return a device to the live operating profile and resume managed optimization.
Protected
Lock
Hold the current configuration in place while preserving observability.
Baseline
Revert
Restore the original device state cleanly whenever operations require it.
Selected actionNo pending changes
Two modules, your choice
Optimize the network, the chips, or both.
Each one is a separate switch on every device. Turn on what fits the machine — nothing changes until you say so.
Network optimization
Routes each miner through the managed Stratum proxy to cut latency and stale or rejected shares. It never changes how the hardware runs, so it is safe on any firmware — including locked stock.
More accepted shares from the same hashrate
Pool failover and reconnect handling
Works on every firmware, no exceptions
Chip optimization
Drives your firmware's own tuner toward a target computed for profit and hardware life. Pick the objective: longest life, best J/TH, or maximum profit at your real electricity price.
Longevity, efficiency or economic objective
Hard thermal guardrail you cannot override
Derates a degrading hashboard before it fails
Predicts which board fails next, days ahead of time
| Your firmware | Telemetry | Network module | Chip module |
|---|---|---|---|
| Braiins OS+ | Full | Yes | Yes |
| LuxOS | Full | Yes | Yes |
| VNish | Full | Yes | Yes |
| Stock manufacturer firmware | Full | Yes | Not possible |
HashOps is not a firmware and does not replace yours. Chip optimization works by driving the tuner your firmware already has, through its own documented API — Braiins OS+, LuxOS and VNish keep doing the per-chip work they are good at. What HashOps adds is the decision they cannot make on their own: what to aim for, given your electricity price, your payout, and how each individual board is ageing. Stock firmware exposes no tuning API at all, so that module is unavailable there and the dashboard says so plainly.
Board-level foresight
See a board failing before it fails.
Every board's daily-averaged hashrate is fit to a trend line. When that fit is strong enough to trust, HashOps flags it early — with a day range, never a fabricated exact date.
Part of Chip optimization. This forecast requires Braiins OS+, LuxOS or VNish, same as the rest of that module — it is not available on stock manufacturer firmware.
7+ days of history requiredNo projection before there is enough daily-averaged signal to trust.
Confidence-gatedA noisy board says "not enough signal yet," never a guess dressed as a forecast.
A range, not a dateProjections are given as a day range — a linear fit through real hardware wear is an estimate, not a promise.
Built from daily averagesReads day-over-day trend, not 30-second noise, so the slope means something.
Board healthUnit HX-94A7
Board 1142/144 chips · 61.4°C
Board 2144/144 chips · 63.1°C
Trend forecast
Board 3Declining — projected 18–26 days to threshold
Board 4Not enough signal yet — 4 of 7 days collected
Per-device plans
Simple terms. No hidden hashrate tax.
Choose the commitment that fits your fleet. Every plan includes the complete control and telemetry layer.
All prices in USDC · Per connected device · Cancel or revert at any time
5USDC / MO
Maximum flexibility for changing fleets and short deployments.
Full live telemetryManaged Stratum routingLock, unlock & revert
Choose monthly48USDC / YR
20% cheaper than paying monthly, for stable year-round operations.
Everything in Monthly20% cheaper per deviceNo monthly renewals
Choose annual290USDC / ONCE
One device, one payment, continuous access for its working life.
Everything in AnnualOne payment, no renewalsOngoing platform updates
Choose lifetimeBest for efficient current-generation hardware, or older hardware running on power under ~$0.06/kWh. If a device is already unprofitable at your electricity rate, no software subscription fixes that — telemetry alone won't turn a loss into a profit, so talk to us before signing up.
Fleet ready
More uptime.
Less overhead.
Connect your first miner and see the whole operating picture in one place.